| Naslov: | Multicriteria optimisation of machining operations using a spreadsheet model |
|---|
| Avtorji: | ID Buchmeister, Borut (Avtor)
ID Palčič, Iztok (Avtor)
ID Ojsteršek, Robert (Avtor)
ID Kovič, Klemen (Avtor)
ID Javernik, Aljaž (Avtor) |
|---|
| Datoteke: |  tj_18_2024_3_445-451.pdf (1,04 MB)
MD5: FE55E7D2722D68F653641491AC3FFE41
 https://hrcak.srce.hr/319185
|
|---|
| Jezik: | Angleški jezik |
|---|
| Vrsta gradiva: | Članek v reviji |
|---|
| Tipologija: | 1.01 - Izvirni znanstveni članek |
|---|
| Organizacija: | FS - Fakulteta za strojništvo
|
|---|
| Opis: | The rapid development of new materials and tools demonstrates the need for efficient and feasible machining processes. Modern production systems must guarantee sustainable, flexible, productive and high-quality production at low cost. Therefore, the combination of technological data with advanced software solutions is very important, especially when using complex CNC machining systems, where the reliability of the technological information is crucial, as simple measures can make a very positive contribution to the productivity achieved. When optimising the machining parameters, costs and machining time must be taken into account. The article deals with the optimisation of the turning process with a large number of influencing variables (machine, workpiece material, tool, cutting parameters, costs, etc.) and two objectives: the fastest possible machining (minimisation of machining time) and the lowest possible machining costs. The model is designed in an Excel spreadsheet and the multi-criteria optimisation is carried out using the approximation method. Step by step, we can find the optimal processing regime for each selected case. |
|---|
| Ključne besede: | cost, cutting parameters, machining, optimisation, time |
|---|
| Status publikacije: | Objavljeno |
|---|
| Verzija publikacije: | Objavljena publikacija |
|---|
| Poslano v recenzijo: | 14.05.2024 |
|---|
| Datum sprejetja članka: | 22.05.2024 |
|---|
| Datum objave: | 05.09.2024 |
|---|
| Založnik: | Sveučilište Sjever |
|---|
| Leto izida: | 2024 |
|---|
| Št. strani: | str. 445-451 |
|---|
| Številčenje: | Vol. 18, no. 3 |
|---|
| PID: | 20.500.12556/DKUM-96492  |
|---|
| UDK: | 658.5:621.9 |
|---|
| COBISS.SI-ID: | 203707907 |
|---|
| DOI: | 10.31803/tg-20240514150731 |
|---|
| ISSN pri članku: | 1848-5588 |
|---|
| Datum objave v DKUM: | 14.01.2026 |
|---|
| Število ogledov: | 170 |
|---|
| Število prenosov: | 8 |
|---|
| Metapodatki: |    |
|---|
| Področja: | Ostalo
|
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Skupna ocena: | (0 glasov) |
|---|
| Vaša ocena: | Ocenjevanje je dovoljeno samo prijavljenim uporabnikom. |
|---|
| Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
