| Naslov: | Design and fabrication of a demonstration model for promoting low-carbon energy technologies |
|---|
| Avtorji: | ID Pezdevšek, Marko (Avtor)
ID Kosinac, Garsija (Avtor)
ID Pišotek, Boštjan (Avtor)
ID Predin, Andrej (Avtor)
ID Roger, Andraž (Avtor)
ID Fike, Matej (Avtor)
ID Hren, Gorazd (Avtor) |
|---|
| Datoteke: |  Design_and_fabrication_of_a_dem-Pezdevsek-2025.pdf (704,10 KB)
MD5: A4EC4B8CA9744F5671DFE046315E5C3C
 https://journals.um.si/index.php/jet/article/view/5468/3511
|
|---|
| Jezik: | Angleški jezik |
|---|
| Vrsta gradiva: | Neznano |
|---|
| Tipologija: | 1.04 - Strokovni članek |
|---|
| Organizacija: | FE - Fakulteta za energetiko
|
|---|
| Opis: | This article presents the design, construction and educational application of a large-scale model representing renewable energy facilities that do not yet exist. The model features a circular layout with a diameter of 2 metres, divided into two halves: the Mokrice Hydropower Plant and a nuclear power plant with an accompanying low- and intermediate-level radioactive waste repository. The Mokrice half highlights key ecological and technical features, including two fish passages and a solar power plant installation, with realistic water effects achieved using epoxy resin. The nuclear half includes a removable low- and intermediate-level radioactive waste repository, allowing viewers to explore the storage arrangements via a cross-sectional view. All the components were fabricated using FDM 3D printing, assembled, finished with paint and landscaping materials, and mounted on a wooden base with a metal support structure. While the model was not intended to achieve exact technical scaling, it communicates complex energy infrastructures effectively, facilitating public understanding, awareness and dialogue about low-carbon technologies. The combination of additive manufacturing, interactive features and detailed landscape representation, demonstrates the value of models as tools for education, demonstration, and the promotion of sustainable energy solutions. |
|---|
| Ključne besede: | model, nuclear power plant, hydro power plant, 3D printing, CAD |
|---|
| Status publikacije: | Objavljeno |
|---|
| Verzija publikacije: | Objavljena publikacija |
|---|
| Poslano v recenzijo: | 01.10.2025 |
|---|
| Datum sprejetja članka: | 26.10.2025 |
|---|
| Datum objave: | 28.11.2025 |
|---|
| Leto izida: | 2025 |
|---|
| Št. strani: | str. 169-176 |
|---|
| Številčenje: | Letn. 18, Št. 3 |
|---|
| PID: | 20.500.12556/DKUM-96584  |
|---|
| UDK: | 620.92/.98 |
|---|
| COBISS.SI-ID: | 265023235 |
|---|
| DOI: | 10.18690/jet.18.3.169-176.2025 |
|---|
| ISSN pri članku: | 1855-5748 |
|---|
| Datum objave v DKUM: | 20.01.2026 |
|---|
| Število ogledov: | 152 |
|---|
| Število prenosov: | 15 |
|---|
| Metapodatki: |    |
|---|
| Področja: | Ostalo
|
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Skupna ocena: | (0 glasov) |
|---|
| Vaša ocena: | Ocenjevanje je dovoljeno samo prijavljenim uporabnikom. |
|---|
| Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
