| Naslov: | Precision blade manufacturing: small-sample prediction and optimization using improved meta-learning and Particle Swarm Optimization |
|---|
| Avtorji: | ID Zhang, Lian (Avtor)
ID Wang., Q. (Avtor)
ID Xia, Y. T. (Avtor)
ID Xia, Y. L. (Avtor) |
|---|
| Datoteke: |  APEM20-3_369-379.pdf (1,72 MB)
MD5: F033F9C60541039F2905701F7DF25269
 https://apem-journal.org/Archives/2025/Abstract-APEM20-3_369-379.html
|
|---|
| Jezik: | Angleški jezik |
|---|
| Vrsta gradiva: | Članek v reviji |
|---|
| Tipologija: | 1.01 - Izvirni znanstveni članek |
|---|
| Organizacija: | FS - Fakulteta za strojništvo
|
|---|
| Opis: | Accurately predicting blade manufacturing deviations from limited experimental data remains challenging due to the complex nonlinear relationship between process parameters and resulting profile deviations in precision casting. To overcome the limitations inherent in traditional approaches and conventional machine learning methods, this study proposes a novel prediction and optimization framework specifically designed for small-sample scenarios, integrating enhanced meta-learning optimization with advanced Particle Swarm Optimization (PSO). We innovatively improve the model-agnostic meta-learning (MAML) algorithm by incorporating a dynamic loss function weighting strategy and a stochastic gradient descent with warm restarts (SGDR) learning rate mechanism, significantly mitigating overfitting and enhancing generalization performance. Additionally, we propose a process parameter optimization model utilizing an improved PSO algorithm with dynamic inertia and adaptive learning factors, designed to effectively navigate high-dimensional optimization landscapes. Experimental validation using orthogonal design data highlights pulling speed as the dominant factor influencing blade deviations (Pearson correlation coefficient (r = 0.67). The optimized parameters—low pulling speed (1.5 mm/min) and high pouring temperature (1530 °C)—achieve an 11.54 % reduction in blade deformation. The improved MAML-based prediction model demonstrates superior accuracy, achieving a mean absolute error (MAE) of 2.566 × 10−4 mm, representing a 21.7 % improvement over traditional Adam optimization methods, and exhibits robust predictive capability (R2 = 0.92) in small-sample contexts. This research not only delivers practical insights and precise parameter recommendations for complex blade manufacturing processes but also establishes a robust methodological framework applicable broadly to precision manufacturing domains characterized by limited data availability. |
|---|
| Ključne besede: | precise manufacturing, optimization, meta-learning optimization, machine learning, small sample learning, Particle Swarm Optimization, PSO |
|---|
| Status publikacije: | Objavljeno |
|---|
| Verzija publikacije: | Objavljena publikacija |
|---|
| Poslano v recenzijo: | 07.04.2025 |
|---|
| Datum sprejetja članka: | 29.08.2025 |
|---|
| Datum objave: | 31.10.2025 |
|---|
| Založnik: | Chair of Production Engineering (CPE), University of Maribor Faculty of Mechanical Engineering |
|---|
| Leto izida: | 2025 |
|---|
| Št. strani: | str. 369-379 |
|---|
| Številčenje: | Vol. 20, no. 3 |
|---|
| PID: | 20.500.12556/DKUM-96683  |
|---|
| UDK: | 658.5 |
|---|
| COBISS.SI-ID: | 265833219 |
|---|
| DOI: | 10.14743/apem2025.3.546 |
|---|
| ISSN pri članku: | 1854-6250 |
|---|
| Datum objave v DKUM: | 23.01.2026 |
|---|
| Število ogledov: | 215 |
|---|
| Število prenosov: | 5 |
|---|
| Metapodatki: |    |
|---|
| Področja: | Ostalo
|
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Skupna ocena: | (0 glasov) |
|---|
| Vaša ocena: | Ocenjevanje je dovoljeno samo prijavljenim uporabnikom. |
|---|
| Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
