| Naslov: | A NSGA-II based approach for multi-objective optimization of a reconfigurable manufacturing transfer line supported by Digital Twin : a case study |
|---|
| Avtorji: | ID Ali, M. A. (Avtor)
ID Alarjani, A. (Avtor)
ID Mumtaz, M. A. (Avtor) |
|---|
| Datoteke: |  APEM18-1_116-129.pdf (1,07 MB)
MD5: 8C2CA3528FC8CA8C5E7EF29F4FF4BB89
 https://apem-journal.org/Archives/2023/Abstract-APEM18-1_116-129.html
|
|---|
| Jezik: | Angleški jezik |
|---|
| Vrsta gradiva: | Članek v reviji |
|---|
| Tipologija: | 1.01 - Izvirni znanstveni članek |
|---|
| Organizacija: | FS - Fakulteta za strojništvo
|
|---|
| Opis: | In response to the wide range of customer demands, the concept of reconfigurable manufacturing systems (RMS) was introduced in the industrial sector. RMS enables producers to meet varying volumes of demand over varying time periods by swiftly adjusting its production capacity and functionality within a part family in response to abrupt market changes. In these circumstances, RMS are made to swiftly reconfigure their Reconfigurable Machine Tools (RMTs). RMTs are designed to have a variety of configurations that may be conditionally chosen and reconfigured in accordance with specific performance goals. However, the reconfiguration process is not an easy process, which entails optimization of several objectives and many of which are inherently conflictual. As a result, it necessitates real-time monitoring of the RMS's condition, which may be achieved by digital twinning, or the real-time capture of system data. The concept of using a digital replica of a physical system to provide real-time optimization is known as digital twin. This work considered a case study of discrete parts manufacturing on a reconfigurable single manufacturing transfer line (SMTL). Six manufacturing operations are required to be performed on the parts at six production stages. This work uses the Digital Twin (DT) based approach to assist a discrete multi-objective optimization problem for a reconfigurable manufacturing transfer line. This multi-objective optimization problem consists of four objective functions which is illustrated by using DT-based Non-dominated Sorting Genetic Algorithm-II (NSGA-II). The innovative aspect of the current study is the use of a DT-based framework for RMS reconfiguration to produce the best optimum solutions. The produced real-time solutions will be of great assistance to the decision maker in selecting the appropriate real-time optimal solutions for reconfigurable manufacturing transfer lines. |
|---|
| Ključne besede: | reconfigurable manufacturing system, digital twin, multi-objective optimization, evolutionary computation, evolutionary algorithm, non-dominated sorting genetic algorithm-II, NSGA-II, reconfigurable machine tools, smart manufacturing |
|---|
| Status publikacije: | Objavljeno |
|---|
| Verzija publikacije: | Objavljena publikacija |
|---|
| Poslano v recenzijo: | 14.03.2023 |
|---|
| Datum sprejetja članka: | 17.04.2023 |
|---|
| Datum objave: | 29.04.2023 |
|---|
| Založnik: | Chair of Production Engineering (CPE), University of Maribor Faculty of Mechanical Engineering |
|---|
| Leto izida: | 2023 |
|---|
| Št. strani: | str. 116-129 |
|---|
| Številčenje: | Vol. 18, no. 1 |
|---|
| PID: | 20.500.12556/DKUM-97028  |
|---|
| UDK: | 658.5 |
|---|
| COBISS.SI-ID: | 268109059 |
|---|
| DOI: | 10.14743/apem2023.1.461 |
|---|
| ISSN pri članku: | 1854-6250 |
|---|
| Avtorske pravice: | Content from this work may be used under the terms of the Creative Commons Attribution 4.0 International Licence (CC BY 4.0). Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI. |
|---|
| Datum objave v DKUM: | 12.02.2026 |
|---|
| Število ogledov: | 197 |
|---|
| Število prenosov: | 3 |
|---|
| Metapodatki: |    |
|---|
| Področja: | Ostalo
|
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Skupna ocena: | (0 glasov) |
|---|
| Vaša ocena: | Ocenjevanje je dovoljeno samo prijavljenim uporabnikom. |
|---|
| Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
