| Naslov: | Effect of printing parameters on the mechanical behaviour of the thermoplastic polymer processed by FDM technique: a research review |
|---|
| Avtorji: | ID Tripathy, C. R. (Avtor)
ID Sharma, R. K. (Avtor)
ID Rattan, V. K. (Avtor) |
|---|
| Datoteke: |  APEM17-3_279-294.pdf (1,05 MB)
MD5: 4D0DF617D14F31FBD9651EF1FCE9195E
 https://apem-journal.org/Archives/2022/APEM17-3_279-294.pdf
|
|---|
| Jezik: | Angleški jezik |
|---|
| Vrsta gradiva: | Članek v reviji |
|---|
| Tipologija: | 1.02 - Pregledni znanstveni članek |
|---|
| Organizacija: | FS - Fakulteta za strojništvo
|
|---|
| Opis: | Fused deposition modelling (FDM) is an additive-based manufacturing technique used by various industries due to its effectiveness & ability to make complicated geometries possible. This technique requires sufficient knowledge about the process and its parameters including their effect on the component’s mechanical characteristics. Thus, it is crucial to review the available articles on this topic not only to identify the practical and useful aspects, limitations, and process variables but also to understand how the results of the literature are relevant to be used for real applications and further studies. A systematic literature review is carried out based on the type of 3D printing materials. The printing parameters which influence the mechanical characteristics of the FDM specimens are discussed based on the results presented in the literature. From the present study, it has been found that the process variables such as orientation, raster angle, raster width, layer height, and contours directly affect the quality of the 3D-printed parts. It has also been found that the effect of these process variables also varies with the type of thermoplastic materials. The present article will help researchers to select FDM processed material and appropriate process variables for further research. |
|---|
| Ključne besede: | 3D printing, additive manufacturing, fused deposition modeling (FDM), process parameters, mechanical properties, thermoplastic polymer, review study |
|---|
| Status publikacije: | Objavljeno |
|---|
| Verzija publikacije: | Objavljena publikacija |
|---|
| Poslano v recenzijo: | 13.05.2022 |
|---|
| Datum sprejetja članka: | 12.09.2022 |
|---|
| Datum objave: | 30.09.2022 |
|---|
| Založnik: | Chair of Production Engineering (CPE), University of Maribor Faculty of Mechanical Engineering |
|---|
| Leto izida: | 2022 |
|---|
| Št. strani: | str. 279-297 |
|---|
| Številčenje: | Vol. 17, no. 3 |
|---|
| PID: | 20.500.12556/DKUM-97153  |
|---|
| UDK: | 621:678.073 |
|---|
| COBISS.SI-ID: | 269097475 |
|---|
| DOI: | 10.14743/apem2022.3.436 |
|---|
| ISSN pri članku: | 1854-6250 |
|---|
| Avtorske pravice: | Content from this work may be used under the terms of the Creative Commons Attribution 4.0 International Licence (CC BY 4.0). Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI. |
|---|
| Datum objave v DKUM: | 20.02.2026 |
|---|
| Število ogledov: | 203 |
|---|
| Število prenosov: | 3 |
|---|
| Metapodatki: |    |
|---|
| Področja: | Ostalo
|
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Skupna ocena: | (0 glasov) |
|---|
| Vaša ocena: | Ocenjevanje je dovoljeno samo prijavljenim uporabnikom. |
|---|
| Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
