| Naslov: | A plant simulation approach for optimal resource utilization: a case study in the tire manufacturing industry |
|---|
| Avtorji: | ID Butrat, A. (Avtor)
ID Supsomboon, S. (Avtor) |
|---|
| Datoteke: |  APEM17-2_243-255.pdf (2,70 MB)
MD5: EB6F2AFC93547AB494841910AD419B6E
|
|---|
| Jezik: | Angleški jezik |
|---|
| Vrsta gradiva: | Članek v reviji |
|---|
| Tipologija: | 1.01 - Izvirni znanstveni članek |
|---|
| Organizacija: | FS - Fakulteta za strojništvo
|
|---|
| Opis: | In this study, the resource allocation and vital manufacturing processes in the tire manufacturing industry was comprehensively optimized. The paper deals in detail with the Banbury mixing process, which produces homogeneous rubber materials for tire components. In addition, the mixing process models were established by the Plant Simulation software to validate and compare scenarios and experiments with realistic production constraints. Discrete empirical distribution (dEmp) was proposed for population data. Various scenarios were created for different resource and process. Experiments were set as different group of compound set. Experiment manager was used as a tool to set up scenarios and the experiments to provide alternative results. The study results display the production time and machine utilization. The shortest production time of experiment results represents the best group of each scenario. As results, the scenario, which BB1 is changed from non-productive Banbury mixer to special Banbury mixer along with the normal process is combined with second special process, provides the suitable production volume which can reduce of total production time for 8.06 %. Our study provides a variety of the resource utilization of a Banbury mixing process and suggests an efficient optimization method for production performance improvement. |
|---|
| Ključne besede: | manufacturing, resource utilization, bottleneck, optimization, simualtion modelling, discrete-event simulation, DES, discrete empirical distribution, tires, rubber, banbury mixer, tecnomatix plant simulation |
|---|
| Status publikacije: | Objavljeno |
|---|
| Verzija publikacije: | Objavljena publikacija |
|---|
| Poslano v recenzijo: | 22.11.2021 |
|---|
| Datum sprejetja članka: | 13.06.2022 |
|---|
| Datum objave: | 31.08.2022 |
|---|
| Založnik: | Fakulteta za strojništvo, Inštitut za proizvodno strojništvo |
|---|
| Leto izida: | 2022 |
|---|
| Št. strani: | str. 243-255 |
|---|
| Številčenje: | Vol. 17, no. 2 |
|---|
| PID: | 20.500.12556/DKUM-97227  |
|---|
| UDK: | 658.5 |
|---|
| COBISS.SI-ID: | 269412867 |
|---|
| DOI: | 10.14743/apem2022.2.434 |
|---|
| ISSN pri članku: | 1854-6250 |
|---|
| Avtorske pravice: | Content from this work may be used under the terms of the Creative Commons Attribution 4.0 International Licence (CC BY 4.0). Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation, and DOI.
|
|---|
| Datum objave v DKUM: | 24.02.2026 |
|---|
| Število ogledov: | 151 |
|---|
| Število prenosov: | 4 |
|---|
| Metapodatki: |    |
|---|
| Področja: | Ostalo
|
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Skupna ocena: | (0 glasov) |
|---|
| Vaša ocena: | Ocenjevanje je dovoljeno samo prijavljenim uporabnikom. |
|---|
| Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
