| Naslov: | Hybrid ANFIS-Rao algorithm for surface roughness modelling and optimization in electrical discharge machining |
|---|
| Avtorji: | ID Agarwal, N. (Avtor)
ID Shrivastava, N. (Avtor)
ID Pradhan, M. K. (Avtor) |
|---|
| Datoteke: |  APEM16-2_145-160.pdf (1,59 MB)
MD5: F84731BC3CC551A4894741A4CED406F7
 https://apem-journal.org/Archives/2021/Abstract-APEM16-2_145-160.html
|
|---|
| Jezik: | Angleški jezik |
|---|
| Vrsta gradiva: | Članek v reviji |
|---|
| Tipologija: | 1.01 - Izvirni znanstveni članek |
|---|
| Organizacija: | FS - Fakulteta za strojništvo
|
|---|
| Opis: | Advanced modeling and optimization techniques are imperative today to deal with complex machining processes like electric discharge machining (EDM). In the present research, Titanium alloy has been machined by considering different electrical input parameters to evaluate one of the important surface integrity (SI) parameter that is surface roughness Ra. Firstly, the response surface methodology (RSM) has been adopted for experimental design and for generating training data set. The artificial neural network (ANN) model has been developed and optimized for Ra with the same training data set. Finally, an adaptive neuro-fuzzy inference system (ANFIS) model has been developed for Ra. Optimization of the developed ANFIS model has been done by applying the latest optimization techniques Rao algorithm and the Jaya algorithm. Different statistical parameters such as the mean square error (MSE), the mean absolute error (MAE), the root mean square error (RMSE), the mean bias error (MBE) and the mean absolute percentage error (MAPE) elucidate that the ANFIS model is better than the ANN model. Both the optimization algorithms results in considerable improvement in the SI of the machined surface. Comparing the Rao algorithm and Jaya algorithm for optimization, it has been found that the Rao algorithm performs better than the Jaya algorithm. |
|---|
| Ključne besede: | electrical-discharge machining (EDM), Titanium alloy, surface roughness, modelling, optimization, artificial neural networks (ANN), adaptive neuro fuzzy inference system (ANFIS), Rao algorithm, Jaya algorithm |
|---|
| Status publikacije: | Objavljeno |
|---|
| Verzija publikacije: | Objavljena publikacija |
|---|
| Poslano v recenzijo: | 27.10.2020 |
|---|
| Datum sprejetja članka: | 15.05.2021 |
|---|
| Datum objave: | 25.06.2021 |
|---|
| Založnik: | Univerza v Mariboru |
|---|
| Leto izida: | 2021 |
|---|
| Št. strani: | str. 145-160 |
|---|
| Številčenje: | Vol. 16, no. 2 |
|---|
| PID: | 20.500.12556/DKUM-97321  |
|---|
| UDK: | 004.8:621.9 |
|---|
| COBISS.SI-ID: | 269639683 |
|---|
| DOI: | 10.14743/apem2021.2.390 |
|---|
| ISSN pri članku: | 1854-6250 |
|---|
| Datum objave v DKUM: | 27.02.2026 |
|---|
| Število ogledov: | 112 |
|---|
| Število prenosov: | 4 |
|---|
| Metapodatki: |    |
|---|
| Področja: | Ostalo
|
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Skupna ocena: | (0 glasov) |
|---|
| Vaša ocena: | Ocenjevanje je dovoljeno samo prijavljenim uporabnikom. |
|---|
| Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
