| Naslov: | Numerical Analysis of Rapid Solidification of NiTi Alloy : Influence of Boundary Conditions |
|---|
| Avtorji: | ID Zadravec, Matej (Avtor)
ID Ternik, Primož (Avtor)
ID Rudolf, Rebeka (Avtor)
ID Svetec, Milan (Avtor) |
|---|
| Datoteke: |  RAZ_Zadravec_Matej_2014.pdf (1,52 MB)
MD5: F2DBFA4EEC3E892C66C042DABC2D435A
 https://journals.um.si/index.php/anali-pazu/en/article/view/1978
|
|---|
| Jezik: | Angleški jezik |
|---|
| Vrsta gradiva: | Znanstveno delo |
|---|
| Tipologija: | 1.01 - Izvirni znanstveni članek |
|---|
| Organizacija: | UZUM - Univerzitetna založba Univerze v Mariboru
|
|---|
| Opis: | The objective of the present work is to analyze influence of temperature boundary conditions on the solidification process of NiTi alloy. Alloy is taken as an incompressible fluid where the heat is transferred by conduction and convection, including the thermal phase change phenomenon. The last one is modelled by the improvement procedure, so-called enthalpy-porosity formulation, where the liquid-solid mushy zone is treated as a porous zone with porosity equal to the liquid fraction. The numerical model is based on the finite volume method in body fitted coordinates with a SIMPLER scheme to couple the pressure and velocity fields. Simulation presents solidification for two cooling cases on the cylindrical part, where in the first case the adiabatic boundary condition is considered and in the second case the convective cooling over the wall is present. The results are presented for the velocity and temperature field as well as for the NiTi mass fraction during the solidification process. Results shows that velocity and temperature field is strongly affected by the different cooling condition on the cylindrical wall and therefore the solidification process of the alloy. Analysis shows that cooling on the cylindrical part is one of the major parameters for alloy solidification and therefore should not be neglected. |
|---|
| Ključne besede: | solidification, finite volume method, phase change |
|---|
| Status publikacije: | Objavljeno |
|---|
| Verzija publikacije: | Objavljena publikacija |
|---|
| Datum objave: | 01.01.2014 |
|---|
| Kraj izida: | Maribor |
|---|
| Založnik: | Univerza v Mariboru, Univerzitetna založba |
|---|
| Leto izida: | 2014 |
|---|
| Št. strani: | 7 |
|---|
| Številčenje: | Letn.4, št.2 |
|---|
| PID: | 20.500.12556/DKUM-97364  |
|---|
| UDK: | 620.3:669 |
|---|
| COBISS.SI-ID: | 19046166 |
|---|
| DOI: | 10.18690/analipazu.4.2.82-88.2014 |
|---|
| ISSN pri članku: | 2820-364X |
|---|
| Datum objave v DKUM: | 02.03.2026 |
|---|
| Število ogledov: | 168 |
|---|
| Število prenosov: | 2 |
|---|
| Metapodatki: |    |
|---|
| Področja: | Ostalo
|
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Skupna ocena: | (0 glasov) |
|---|
| Vaša ocena: | Ocenjevanje je dovoljeno samo prijavljenim uporabnikom. |
|---|
| Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
