| Naslov: | A smart Warehouse 4.0 approach for the pallet management using machine vision and Internet of Things (IoT): A real industrial case study |
|---|
| Avtorji: | ID Ye, C. M. (Avtor)
ID Li, Y. (Avtor) |
|---|
| Datoteke: |  APEM16-3_297-306.pdf (1,33 MB)
MD5: C42E17CCD7E1186B955021A431AEE6DE
 https://apem-journal.org/Archives/2021/APEM16-3_297-306.pdf
|
|---|
| Jezik: | Angleški jezik |
|---|
| Vrsta gradiva: | Članek v reviji |
|---|
| Tipologija: | 1.01 - Izvirni znanstveni članek |
|---|
| Organizacija: | FS - Fakulteta za strojništvo
|
|---|
| Opis: | Printing companies are commonly SMEs with high flow of materials, which management could be significantly improved through the digitalization. In this study we propose a smart Warehouse 4.0 solution by using QR code, open-source software tools for machine vision and conventional surveillance equipment. Although there have been concerns regarding the usage of QR in logistics, it has shown to be suitable for the particular use-case as pallets are static in the inter-warehouse. The reliability of reading of QR codes was achieved by using multiple IP cameras, so that sub-optimal view angle or light reflection is compensated with alternative views. Since surveillance technology and machine vision are constantly evolving and becoming more affordable, we report that more attention needs to be invested into their adaptation to fit the needs and budgets of SMEs, which are the industrial cornerstone in the most developed countries. The demo of proposed solution is available on the public repository https://github.com/ArsoVukicevic/PalletManagement. |
|---|
| Ključne besede: | smart manufacturing, Industry 4.0, logistics 4.0, warehousing 4.0, pallet management, machine vision, Internet of Things (IoT), QR code |
|---|
| Status publikacije: | Objavljeno |
|---|
| Verzija publikacije: | Objavljena publikacija |
|---|
| Poslano v recenzijo: | 30.05.2020 |
|---|
| Datum sprejetja članka: | 17.09.2021 |
|---|
| Datum objave: | 31.10.2021 |
|---|
| Založnik: | Chair of Production Engineering (CPE), University of Maribor Faculty of Mechanical Engineering |
|---|
| Leto izida: | 2021 |
|---|
| Št. strani: | str. 297-306 |
|---|
| Številčenje: | Vol. 16, no. 3 |
|---|
| PID: | 20.500.12556/DKUM-97390  |
|---|
| UDK: | 681.5:004.5 |
|---|
| COBISS.SI-ID: | 270077187 |
|---|
| DOI: | 10.14743/apem2021.3.401 |
|---|
| ISSN pri članku: | 1854-6250 |
|---|
| Avtorske pravice: | Content from this work may be used under the terms of the Creative Commons Attribution 4.0 International Licence (CC BY 4.0). Any further distribution of this work must maintain attribution to the author(s) and the title of the work, journal citation and DOI. |
|---|
| Datum objave v DKUM: | 03.03.2026 |
|---|
| Število ogledov: | 136 |
|---|
| Število prenosov: | 6 |
|---|
| Metapodatki: |    |
|---|
| Področja: | Ostalo
|
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Skupna ocena: | (0 glasov) |
|---|
| Vaša ocena: | Ocenjevanje je dovoljeno samo prijavljenim uporabnikom. |
|---|
| Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
