| Naslov: | Multi‑core fiber‑optic dual‑axis differential accelerometer with a broadly configurable operating range |
|---|
| Avtorji: | ID Javornik, Jure (Avtor)
ID Đonlagić, Denis (Avtor) |
|---|
| Datoteke: |  1-s2.0-S0924424726002645-main.pdf (5,96 MB)
MD5: 7AE00A78495A8E3C4DF2BCF60172A132
|
|---|
| Jezik: | Angleški jezik |
|---|
| Vrsta gradiva: | Članek v reviji |
|---|
| Tipologija: | 1.01 - Izvirni znanstveni članek |
|---|
| Organizacija: | FERI - Fakulteta za elektrotehniko, računalništvo in informatiko
|
|---|
| Opis: | This paper presents a miniature, dual-axis, widely tunable fiber-optic accelerometer based on a four-core fiber, mechanically coupled to an inertial mass by the superelastic NiTi microwire. The proposed structure forms a compact spring–damper system with an adjustable eigenfrequency and acceleration sensitivity at the optical fiber tip. Four Fabry–Pérot interferometers are established within the structure, each being resolved by the designated core of the four-core fiber, enabling interferometric, differential and temperature-compensated two-dimensional inertial mass displacement sensing. Several devices with varying key dimensions were fabricated to validate the proposed design concept. The fabricated accelerometers exhibited eigenfrequencies ranging from 26.1 Hz to 11 kHz and static sensitivities from 3250 nm/g to 0.27 nm/g, with a noise floor as low as 80 µg/√Hz. Cross-axis sensitivity was found to be below 5%, while the output variation in both axes remained below 1% of the ±1 g measurement range over a temperature range of ΔT = 60°C. The proposed design is simple and straightforward, offering compactness, broadly configurable operating range, making it well suited for applications requiring small size, low mass, and electrically passive operation. |
|---|
| Ključne besede: | dual-axis optical fiber accelerometer, wide tunable range, differential optical fiber accelerometer, nickel-titanium alloy wire, optical fiber tip accelerometer, multi-core optical fiber |
|---|
| Status publikacije: | Objavljeno |
|---|
| Verzija publikacije: | Objavljena publikacija |
|---|
| Poslano v recenzijo: | 09.10.2025 |
|---|
| Datum sprejetja članka: | 09.03.2026 |
|---|
| Datum objave: | 14.03.2026 |
|---|
| Založnik: | Elsevier B.V. |
|---|
| Leto izida: | 2026 |
|---|
| Št. strani: | 11 tr. |
|---|
| Številčenje: | Vol. 403, [article no.] 117713 |
|---|
| PID: | 20.500.12556/DKUM-97585  |
|---|
| UDK: | 535 |
|---|
| COBISS.SI-ID: | 272366083 |
|---|
| DOI: | 10.1016/j.sna.2026.117713 |
|---|
| ISSN pri članku: | 1873-3069 |
|---|
| Datum objave v DKUM: | 23.03.2026 |
|---|
| Število ogledov: | 186 |
|---|
| Število prenosov: | 20 |
|---|
| Metapodatki: |    |
|---|
| Področja: | Ostalo
|
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Skupna ocena: | (0 glasov) |
|---|
| Vaša ocena: | Ocenjevanje je dovoljeno samo prijavljenim uporabnikom. |
|---|
| Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
