| | SLO | ENG | Piškotki in zasebnost

Večja pisava | Manjša pisava

Izpis gradiva Pomoč

Naslov:Tehnološka in stroškovna analiza uvedbe sesalnega akumulatorja v hladilni sistem
Avtorji:ID Jug, Aleš (Avtor)
ID Čuš, Franc (Mentor) Več o mentorju... Novo okno
Datoteke:.pdf UN_Jug_Ales_2015.pdf (2,62 MB)
MD5: 4809D72AB05D0153AEBE50E5B328B238
 
Jezik:Slovenski jezik
Vrsta gradiva:Diplomsko delo/naloga
Tipologija:2.11 - Diplomsko delo
Organizacija:FS - Fakulteta za strojništvo
Opis:Sesalni akumulator je ključni element raziskave v diplomskem delu. Element se nahaja v hladilnem sistemu za uparjalnikom. Obravnavan problem zajema zamenjavo bakrenega akumulatorja z drugim, ki bo cenovno ugodnejši in bo prav tako izpolnjeval enake tehnične karakteristike kot predhodna izvedba. Problem bakrenega akumulatorja se pojavi pri spoju z aluminijasto cevjo, kjer zaradi neustrezne obdelave površine na spoju prihaja do puščanja. Pri iskanju najugodnejše rešitve sem si pomagal s tabelo virov. V okviru eksperimentalnega dela so bila izvedena mehanska testiranja, testiranja notranje vlage ter nečistoč, slana komora in analiza poroznosti spoja. Ugotoviti je bilo potrebno tudi ustrezen način spajanja ter izvesti stroškovno analizo. Izmed vseh rešitev se je kot najprimernejši izkazal aluminijast akumulator, ki ga v sistem spojimo s postopkom lotanja. Zamenjava akumulatorja omogoča večje prihranke ter zmanjšanje zastojev v proizvodnem procesu.
Ključne besede:hladilni sistem, zamenjava sesalnega akumulatorja, tehnologija spajanja, izbira ustreznega materiala, mehansko testiranje, izračun stroškov, ovrednotenje izbrane rešitve.
Kraj izida:Maribor
Založnik:[A. Jug]
Leto izida:2015
PID:20.500.12556/DKUM-54224 Novo okno
UDK:[658.511:62-71]+657.478(043.2)
COBISS.SI-ID:19140374 Novo okno
NUK URN:URN:SI:UM:DK:QQK7KPIU
Datum objave v DKUM:27.10.2015
Število ogledov:1572
Število prenosov:146
Metapodatki:XML DC-XML DC-RDF
Področja:KTFMB - FS
:
Kopiraj citat
  
Skupna ocena:(0 glasov)
Vaša ocena:Ocenjevanje je dovoljeno samo prijavljenim uporabnikom.
Objavi na:Bookmark and Share



Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše podrobnosti ali sproži prenos.

Sekundarni jezik

Jezik:Angleški jezik
Naslov:Tecnological and cost analysis of introducing the suction accumulator in the cooling system
Opis:Suction accumulator is the key element of the research in the thesis. The element is located in the cooling system behind the evaporator. This issue deals with the replacement of the copper suction accumulator with another, which will be cheaper and will also meet the same characteristics as the previous one. The problem with the copper accumulator occurs in the junction between the accumulator and the aluminium tube. Due to the inadequate treatment of the surface there can be some leakage in the junction. In the search for the best solution I have helped myself with the table of the resources. Experimental work included mechanical testing, testing of internal moisture and impurities, salt chamber testing and analysis of porosity in the joint. I also had to find a suitable way of fusing and carry out a cost analysis. Aluminium accumulator proved to be the most suitable solution and can be added in the cooling system with the process of soldering. The replacement of the suction accumulator is economical and reduces congestions in the manufacturing process.
Ključne besede:cooling system, replacement of the suction accumulator, merge technology, selection of appropriate materials, mechanical testing, calculation of expenses, evaluation of selected solution.


Komentarji

Dodaj komentar

Za komentiranje se morate prijaviti.

Komentarji (0)
0 - 0 / 0
 
Ni komentarjev!

Nazaj
Logotipi partnerjev Univerza v Mariboru Univerza v Ljubljani Univerza na Primorskem Univerza v Novi Gorici