| Naslov: | Numerical simulation of the pile integrity test on defected piles |
|---|
| Avtorji: | ID Ćosić, Mladen (Avtor)
ID Folić, Boris (Avtor)
ID Folić, Radomir (Avtor)
ID Fakulteta za gradbeništvo, prometno inženirstvo in arhitekturo Univerze v Mariboru (Lastnik avtorskih pravic) |
|---|
| Datoteke: |  Acta_geotechnica_Slovenica_2014_Cosic,_Folic,_Folic_Numerical_simulation_of_the_pile_integrity_test_on_defected_piles.pdf (769,91 KB)
MD5: 466316196CFCB4DD3E0FEC232BE2D3A8
PID: 20.500.12556/dkum/a83327a1-fabc-4eb4-b640-564740d4191b
 http://fgserver3.fg.um.si/journal-ags/2014-2/article-1.asp
|
|---|
| Jezik: | Angleški jezik |
|---|
| Vrsta gradiva: | Znanstveno delo |
|---|
| Tipologija: | 1.01 - Izvirni znanstveni članek |
|---|
| Organizacija: | FGPA - Fakulteta za gradbeništvo, prometno inženirstvo in arhitekturo
|
|---|
| Opis: | This paper deals with the development of a discrete numerical 2D and 3D solid pile model with a discontinuity and defects to simulate non-destructive testing using the pile integrity test (PIT). The pile discontinuity and defects were modelled by reducing the specific finite elements and the elastic modulus of concrete. The wave-propagation response of the pile was analyzed based on a step-by-step numerical integration using the Hilber-Hughes-Taylor (HHT) method in the time domain. The concept of a system-response analysis was originally formulated based on the integration of individual reflectograms into a reflectogram surface, which is generated in a 3D cylindrical coordinate system. The use of reflectogram surfaces enables an understanding of wave propagation based on their velocity to a higher level than is usually the case with standard, one-dimensional reflectograms. Changes in the velocity responses on the reflectogram, shifting from a positive to a negative value, point to the locations of discontinuities and defects in the discrete 3D pile model, and there is a clear difference in the reflectograms, depending on the position of the measuring point. The study defines the typological models of the reflectogram: without discontinuities and defects, pile-head defect, defect in the middle of the pile length or a reduced modulus of elasticity in the middle of the pile length, pile-base defect or reduced modulus of elasticity in the pile-base zone and reduced modulus of elasticity in the pile-head zone. |
|---|
| Ključne besede: | reflectogram surface, numerical pile model, solid finite elements |
|---|
| Status publikacije: | Objavljeno |
|---|
| Verzija publikacije: | Objavljena publikacija |
|---|
| Leto izida: | 2014 |
|---|
| Št. strani: | str. 5-19 |
|---|
| Številčenje: | Letn. 11, št. 2 |
|---|
| PID: | 20.500.12556/DKUM-70819  |
|---|
| ISSN: | 1854-0171 |
|---|
| UDK: | 624.131.35 |
|---|
| COBISS.SI-ID: | 281008384 |
|---|
| ISSN pri članku: | 1854-0171 |
|---|
| NUK URN: | URN:SI:UM:DK:1ETJPQFA |
|---|
| Avtorske pravice: | Fakulteta za gradbeništvo, prometno inženirstvo in arhitekturo Univerze v Mariboru |
|---|
| Datum objave v DKUM: | 14.06.2018 |
|---|
| Število ogledov: | 1473 |
|---|
| Število prenosov: | 112 |
|---|
| Metapodatki: |    |
|---|
| Področja: | Ostalo
|
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Skupna ocena: | (0 glasov) |
|---|
| Vaša ocena: | Ocenjevanje je dovoljeno samo prijavljenim uporabnikom. |
|---|
| Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
