| Title: | LCF behaviour of high strength aluminium alloys AA 6110A and AA 6086 |
|---|
| Authors: | ID Klemenc, Jernej (Author)
ID Glodež, Srečko (Author)
ID Steinacher, Matej (Author)
ID Zupanič, Franc (Author) |
|---|
| Files: |  http://dx.doi.org/10.1016/j.ijfatigue.2023.107971
https://www.sciencedirect.com/science/article/pii/S0142112323004723?via%3Dihub
|
|---|
| Language: | English |
|---|
| Work type: | Article |
|---|
| Typology: | 1.01 - Original Scientific Article |
|---|
| Organization: | FS - Faculty of Mechanical Engineering
|
|---|
| Abstract: | The proposed research presents the comprehensive investigation of the Low Cycle Fatigue (LCF) behaviour of two high-strength aluminium alloys of series AA 6xxx: the conventional alloy AA 6110A and the newly developed alloy AA 6086. Both alloys were characterised in the as-cast condition after homogenisation, extrusion, and T6 heat treatment.
The quasi-static strength and hardness of the aluminium alloy AA 6086 were found to be significantly higher if compared to the AA 6110A alloys, while the ductility was a little bit smaller. The LCF tests showed that the AA 6086 alloy is more suitable for the high-cycle fatigue regime. On the other hand, the engineering advantage of the AA 6110A alloy is only for low-cycle fatigue applications if less than 100 loading cycles are expected in the service life of the analysed structure. The fatigue cracks formed predominantly on the α-AlMnSi intermetallic particles in both alloys, and, during LCF tests, exhibited small crack propagation. The area of the fatigue crack growth was much smaller than the area of the forced fracture. At smaller amplitude strains the fatigue striations were present at the fracture surface, while, at higher amplitude strains, they were not present. The obtained experimental results represent a good basis for engineering design applications of the analysed alloys AA 6086 and AA 6110A. |
|---|
| Keywords: | aluminijeve zlitine, malociklično utrujanje, eksperimentalno testiranje, fraktografija, aluminium alloys, low cycle fatigue, experimental testing, fractography |
|---|
| Publication status: | Published |
|---|
| Publication version: | Version of Record |
|---|
| Submitted for review: | 04.08.2023 |
|---|
| Article acceptance date: | 25.09.2023 |
|---|
| Publication date: | 27.09.2023 |
|---|
| Publisher: | Elsevier |
|---|
| Year of publishing: | 2023 |
|---|
| Number of pages: | 10 str. |
|---|
| Numbering: | ǂVol. ǂ177, [article no.] 107971 |
|---|
| PID: | 20.500.12556/DKUM-86749  |
|---|
| UDC: | 669.715:620.1 |
|---|
| ISSN on article: | 0142-1123 |
|---|
| COBISS.SI-ID: | 167923715 |
|---|
| DOI: | 10.1016/j.ijfatigue.2023.107971 |
|---|
| Publication date in DKUM: | 29.03.2024 |
|---|
| Views: | 428 |
|---|
| Downloads: | 22 |
|---|
| Metadata: |    |
|---|
| Categories: | Misc.
|
|---|
|
:
|
Copy citation |
|---|
| | | | Average score: | (0 votes) |
|---|
| Your score: | Voting is allowed only for logged in users. |
|---|
| Share: |  |
|---|
Hover the mouse pointer over a document title to show the abstract or click
on the title to get all document metadata. |
