| Naslov: | Vial wall effect on freeze-drying speed |
|---|
| Avtorji: | ID Ramšak, Matjaž (Avtor)
ID Hriberšek, Matjaž (Avtor) |
|---|
| Datoteke: |  1-s2.0-S0022354923005130-main.pdf (1,88 MB)
MD5: 2D065DD09A90CBC2FEA7DA7F80B6DCED
 https://www.sciencedirect.com/science/article/pii/S0022354923005130
|
|---|
| Jezik: | Angleški jezik |
|---|
| Vrsta gradiva: | Članek v reviji |
|---|
| Tipologija: | 1.01 - Izvirni znanstveni članek |
|---|
| Organizacija: | FS - Fakulteta za strojništvo
|
|---|
| Opis: | The vial wall thermal conductivity and thickness effect on freeze-drying speed is simulated. A 2D axisymmetric numerical simulation of Mannitol freeze-drying is employed using the boundary element method. The originality of the presented approach lies in the simulation of heat transfer in the vial walls as an additional computational domain in contrast to the typical methodology without a vial wall. The numerical model was validated using our measurements and the measurements from the literature. Increasing the glass vial thickness from 1 mm to 2 mm has been found as the major factor in primary drying time, increasing the gravimetrical Kv up to 20 % for all the simulated chamber pressures. The effect of thermal conductivity was simulated using a polymer and aluminium vial replacing the standard glass vial of the same thickness. The polymer vial‘s decreased Kv value is 5.6 % at a low chamber pressure of 50 mTorr, and 12.2 % at 400 mTorr, which is in excellent agreement with the experiment. Using higher conductivity materials, for example, aluminium, only 3.7 % and 2.3 % Kv increase were computed for low and high chamber pressures respectively. |
|---|
| Ključne besede: | freeze-drying, lyophilization speedup, vial heat conductivity, vial wall thickness, boundary element method |
|---|
| Status publikacije: | Objavljeno |
|---|
| Verzija publikacije: | Objavljena publikacija |
|---|
| Poslano v recenzijo: | 07.08.2023 |
|---|
| Datum sprejetja članka: | 04.12.2023 |
|---|
| Datum objave: | 07.12.2023 |
|---|
| Založnik: | American Chemical Society and American Pharmaceutical Association, Elsevier |
|---|
| Leto izida: | 2024 |
|---|
| Št. strani: | str. 1275-1284 |
|---|
| Številčenje: | Vol. 113, iss. 5 |
|---|
| PID: | 20.500.12556/DKUM-88334  |
|---|
| UDK: | 536:519.6 |
|---|
| COBISS.SI-ID: | 192744451 |
|---|
| DOI: | 10.1016/j.xphs.2023.12.005 |
|---|
| ISSN pri članku: | 1520-6017 |
|---|
| Avtorske pravice: | © 2023 The Authors |
|---|
| Datum objave v DKUM: | 16.04.2024 |
|---|
| Število ogledov: | 532 |
|---|
| Število prenosov: | 60 |
|---|
| Metapodatki: |    |
|---|
| Področja: | Ostalo
|
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Skupna ocena: | (0 glasov) |
|---|
| Vaša ocena: | Ocenjevanje je dovoljeno samo prijavljenim uporabnikom. |
|---|
| Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
