| Naslov: | Automated operating point calculation in permanent magnet synchronous motor using Elmer and Python |
|---|
| Avtorji: | ID Sešel, Rok (Avtor)
ID Ritonja, Jožef (Mentor) Več o mentorju... 
ID Grübler, Hannes (Komentor) |
|---|
| Datoteke: |  MAG_Sesel_Rok_2024.pdf (2,69 MB)
MD5: FFD856FBC8EE2B0670762A4C8E835DD9
|
|---|
| Jezik: | Angleški jezik |
|---|
| Vrsta gradiva: | Magistrsko delo/naloga |
|---|
| Tipologija: | 2.09 - Magistrsko delo |
|---|
| Organizacija: | FERI - Fakulteta za elektrotehniko, računalništvo in informatiko
|
|---|
| Opis: | The need for numerical analysis of industrial problems is increasing, which also drives the use of time-consuming and expensive software that employs methods such as the finite element method. The motivation for this master's thesis is to develop a fully parameterized model of a permanent magnet synchronous motor using open-source software, thereby automating the process of numerical analysis. Additionally, the thesis explores the use of "look-up" tables to accelerate the entire process of calculating the motor's operating point by using a program that, based on differential evolution, finds the optimal parameters for the desired operating point, defined by the interphase supply voltage level and the motor's power at the shaft. |
|---|
| Ključne besede: | FEM, look-up table, PMSM, operating point, Elmer |
|---|
| Kraj izida: | Maribor |
|---|
| Založnik: | [R. Sešel] |
|---|
| Leto izida: | 2024 |
|---|
| PID: | 20.500.12556/DKUM-90272 |
|---|
| UDK: | 519.6:621.313.323(043.2) |
|---|
| COBISS.SI-ID: | 218697987 |
|---|
| Datum objave v DKUM: | 19.09.2024 |
|---|
| Število ogledov: | 232 |
|---|
| Število prenosov: | 188 |
|---|
| Metapodatki: |    |
|---|
| Področja: | KTFMB - FERI
|
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Skupna ocena: | (0 glasov) |
|---|
| Vaša ocena: | Ocenjevanje je dovoljeno samo prijavljenim uporabnikom. |
|---|
| Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
