| | SLO | ENG | Cookies and privacy

Bigger font | Smaller font

Show document Help

Title:Yield load solutions for SE(B) fracture toughness specimen with I-shaped heterogeneous weld
Authors:ID Konjatić, Pejo (Author)
ID Katinić, Marko (Author)
ID Kozak, Dražan (Author)
ID Gubeljak, Nenad (Author)
Files:.pdf materials-15-00214-v2.pdf (3,89 MB)
MD5: 392BEC8550A713CBE6DF7E572AF4FB6A
 
URL https://www.mdpi.com/1996-1944/15/1/214
 
Language:English
Work type:Article
Typology:1.01 - Original Scientific Article
Organization:FS - Faculty of Mechanical Engineering
Abstract:The objective of this work was to investigate the fracture behavior of a heterogeneous I-shaped welded joint in the context of yield load solutions. The weld was divided into two equal parts, using the metal with the higher yield strength and the metal with the lower yield strength compared to base metal. For both configurations of the I-shaped weld, one with a crack in strength in the over-matched part of the weld and one for a crack in the under-matched part of the weld, a systematic study of fracture toughness SE(B) specimen was carried out in which the crack length, the width of the weld and the strength mismatch factor for both weld metals were varied, and the yield loads were determined. As a result of the study, two mathematical models for determination of yield loads are proposed. Both models were experimentally tested with one strength mismatch configuration, and the results showed good agreement and sufficiently conservative results compared to the experimental results.
Keywords:yield load, heterogeneous weld, numerical analysis, SE(B) specimen
Publication status:Published
Publication version:Version of Record
Submitted for review:23.11.2021
Article acceptance date:25.12.2021
Publication date:28.12.2022
Publisher:MDPI AG
Year of publishing:2022
Number of pages:11 str.
Numbering:Vol. 15, iss. 1
PID:20.500.12556/DKUM-92216 New window
UDC:621.791:539.42
ISSN on article:1996-1944
COBISS.SI-ID:91698179 New window
DOI:10.3390/ma15010214 New window
Copyright:© 2021 by the authors.
Publication date in DKUM:21.03.2025
Views:194
Downloads:10
Metadata:XML DC-XML DC-RDF
Categories:Misc.
:
Copy citation
  
Average score:(0 votes)
Your score:Voting is allowed only for logged in users.
Share:Bookmark and Share



Hover the mouse pointer over a document title to show the abstract or click on the title to get all document metadata.

Record is a part of a journal

Title:Materials
Shortened title:Materials
Publisher:MDPI
ISSN:1996-1944
COBISS.SI-ID:33588485 New window

Document is financed by a project

Funder:European Regional Development Fund and the Ministry of the Economy, Entrepreneurship and Crafts of the Republic of Croatia
Funding programme:EU project Center of Competences for Advanced Engineering Nova Gradiška
Project number:KK.01.2.203.0011
Acronym:CEKOM NI NG

Funder:EC - European Commission
Funding programme:Marie Curie Fellow Programme
Project number:No. MCFI-1999-00314

Licences

License:CC BY 4.0, Creative Commons Attribution 4.0 International
Link:http://creativecommons.org/licenses/by/4.0/
Description:This is the standard Creative Commons license that gives others maximum freedom to do what they want with the work as long as they credit the author.

Secondary language

Language:Slovenian
Keywords:donosna obremenitev, heterogeni zvarni spoji, numerična analiza, SE(B) primerek


Comments

Leave comment

You must log in to leave a comment.

Comments (0)
0 - 0 / 0
 
There are no comments!

Back
Logos of partners University of Maribor University of Ljubljana University of Primorska University of Nova Gorica