| Naslov: | Adsorption Equilibrium Modelling for Different Temperature Conditions and Its Influence on Adsorption Mass Transfer |
|---|
| Avtorji: | ID Štimec, Teodor (Avtor)
ID Hriberšek, Matjaž (Avtor)
ID Ravnik, Jure (Avtor)
ID Bašič, Sani Marko (Avtor)
ID Zadravec, Matej (Avtor) |
|---|
| Datoteke: |  RAZ_Stimec_Teodor_2016.pdf (1,33 MB)
MD5: D4C1B166FCD3CD7688DC872FBEB54820
 https://journals.um.si/index.php/anali-pazu/en/article/view/1973
|
|---|
| Jezik: | Angleški jezik |
|---|
| Vrsta gradiva: | Znanstveno delo |
|---|
| Tipologija: | 1.01 - Izvirni znanstveni članek |
|---|
| Organizacija: | UZUM - Univerzitetna založba Univerze v Mariboru
|
|---|
| Opis: | The paper deals with numerical modelling of adsorption kinetics in a narrow channel of a honeycomb type adsorber. The mass transfer model consists of solving the diffusion-convection transport equation for adsorbate species in the fluid phase. The adsorbate flux to the wall is computed implicitly by using the Boundary Element Method for the solution of the transport equation. Scalable boundary condition for the adsorbate concentration on the adsorbent walls is used, defined on basis of the ratio of the accumulated adsorbate mass and the equilibrium adsorbate mass for a given system temperature. As the state of equilibrium is dependent also on the system temperature, a sensitivity study of the adsorption process under different system temperatures is performed. Among the studied adsorption equilibria models, including the Freundlich model, Simplified local density (SLD) model and the Dubinin-Radushkevich model, the latter is proved as the best compromise between accuracy and computational cost and applied in mass transfer kinetics computations. The results of computations show, that the increase in system temperature results in a decrease of breakthrough times, as the equilibrium amounts of adsorbate at the adsorbent walls decrease with increasing temperature, therefore making the derived numerical model suitable for further use in detailed mass transfer kinetics computations. |
|---|
| Ključne besede: | subdomain boundary element method, laminar viscous fluid flow, mass transfer, adsorption, honeycomb adsorber |
|---|
| Status publikacije: | Objavljeno |
|---|
| Verzija publikacije: | Objavljena publikacija |
|---|
| Datum objave: | 01.01.2016 |
|---|
| Kraj izida: | Maribor |
|---|
| Založnik: | Univerza v Mariboru, Univerzitetna založba |
|---|
| Leto izida: | 2016 |
|---|
| Št. strani: | 7 |
|---|
| Številčenje: | Letn.5, št.1/2 |
|---|
| PID: | 20.500.12556/DKUM-97360  |
|---|
| UDK: | 532.13 |
|---|
| COBISS.SI-ID: | 19638550 |
|---|
| DOI: | 10.18690/analipazu.5.1-2.26-32.2015 |
|---|
| ISSN pri članku: | 2820-364X |
|---|
| Datum objave v DKUM: | 02.03.2026 |
|---|
| Število ogledov: | 169 |
|---|
| Število prenosov: | 2 |
|---|
| Metapodatki: |    |
|---|
| Področja: | Ostalo
|
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Skupna ocena: | (0 glasov) |
|---|
| Vaša ocena: | Ocenjevanje je dovoljeno samo prijavljenim uporabnikom. |
|---|
| Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
