| Naslov: | Assessing the potential of electrochemical impedance spectroscopy as a supporting tool for equivalent circuit modeling in battery management systems |
|---|
| Avtorji: | ID Batiuk, Denis (Avtor)
ID Mele, Igor (Avtor)
ID Zelič, Klemen (Avtor)
ID Pec, Martin (Avtor)
ID Katrašnik, Tomaž (Avtor)
ID Chowdhury, Amor (Avtor) |
|---|
| Datoteke: |  RAZ_Batiuk_Denis_2026.pdf (654,33 KB)
MD5: 65210E5DE4E0600529AD4E1C01A8EEC7
 https://doi.org/10.18690/jet.19.1.83-108.2026
|
|---|
| Jezik: | Angleški jezik |
|---|
| Vrsta gradiva: | Znanstveno delo |
|---|
| Tipologija: | 1.01 - Izvirni znanstveni članek |
|---|
| Organizacija: | FE - Fakulteta za energetiko
|
|---|
| Opis: | Accurate yet computationally efficient battery models are essential for industrial battery management systems (BMS), which operate under strict constraints on sensing and processing power, as well as certification requirements. Electrical equivalent circuit models (ECMs) are therefore adopted widely in practice, while physics-based models (PBMs) provide detailed descriptions of transport, kinetic, and degradation processes, but are not yet adopted in embedded implementation. The present work assesses the potential of electrochemical impedance spectroscopy (EIS) as a supporting tool for equivalent circuit modeling in BMS applications, with an emphasis on its ability to provide frequency-resolved, process-level indications rather than direct parameter information. By separating the ohmic, charge-transfer, and diffusion-related contributions in the frequency domain, EIS offers complementary insights that are not accessible through time-domain measurements alone. The analysis addresses how such indications can guide ECM structure selection and parameter interpretation, the limitations imposed by measurement duration, noise, and temperature gradients, and the feasibility of EIS-supported modeling approaches under typical BMS constraints. The results delineate the scope within which frequency- informed modeling can enhance physical consistency and diagnostic interpretability while preserving the computational characteristics required for BMS implementation. |
|---|
| Ključne besede: | electrochemical impedance spectroscopy, battery management system, equivalent circuit models, physics-based models, lithium-ion batteries, frequency-domain analysis, parameter identification, diagnostics |
|---|
| Status publikacije: | Objavljeno |
|---|
| Datum objave: | 01.07.2026 |
|---|
| Leto izida: | 2026 |
|---|
| Št. strani: | str. 83-108 |
|---|
| Številčenje: | Letn. 19, št. 1 |
|---|
| PID: | 20.500.12556/DKUM-98913  |
|---|
| UDK: | 621.355.8:004.94:621.317.33 |
|---|
| COBISS.SI-ID: | 285069827 |
|---|
| DOI: | 10.18690/jet.19.1.83-108.2026 |
|---|
| ISSN pri članku: | 1855-5748 |
|---|
| Datum objave v DKUM: | 17.07.2026 |
|---|
| Število ogledov: | 282 |
|---|
| Število prenosov: | 6 |
|---|
| Metapodatki: |    |
|---|
| Področja: | Ostalo
|
|---|
|
:
|
Kopiraj citat |
|---|
| | | | Skupna ocena: | (0 glasov) |
|---|
| Vaša ocena: | Ocenjevanje je dovoljeno samo prijavljenim uporabnikom. |
|---|
| Objavi na: |  |
|---|
Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše
podrobnosti ali sproži prenos. |
